TUBTARA® UFX / SFX
BN 25096 - Blind rivet nuts countersunk head, round shank, closed end
| Headform |
Headform
Countersunk head
|
| Brand |
Brand
TUBTARA®
|
| Brandtype |
Brandtype
UFX / SFX
|
| Material |
Material
Stainless steel
|
| Material type |
Material type
A4
|
Al produktinformation
Produktbeskrivelse
Produktinformation
| Headform |
Headform
Countersunk head
|
| Brand |
Brand
TUBTARA®
|
| Brandtype |
Brandtype
UFX / SFX
|
| Material |
Material
Stainless steel
|
| Material type |
Material type
A4
|
Assembly notice
The countersunk head rivet nut requires a perfect 90° countersink.
After the rivet nut is assembled, the flat head should protrude through the clamped part at least 0,1 mm. During tightening the component that's being fastened will press against the head, consequently preventing the rivet nut from rotating.
Kan anvendes med
BN 14309
TUBTARA® MS 3 - Hand rivet setter fully equipped - Multiple Materials
BN 25054
TUBTARA® K1 - Hand rivet tool fully equipped without socket wrench - Multiple Materials
BN 55432
POP® ProSert® XTN20 - Hydropneumatic setting tool - Multiple Materials
BN 56258
STANLEY® Assembly Technologies NB08PT-18 - Utensile alimentato a batteria per l'installazione di rivetti filettati ciechi - Materiali multipli
BN 56262
Qonnect® Q-TOOL N12XL - Attrezzo a batteria per rivetti tubolari filettati e perni autoaggancianti ciechi - Materiali multipli
BN 55422
POP® PNT1000L-PC - Attrezzo di montaggio idropneumatico - Materiali multipli