KATO® 2TL
BN 37980 - Wire threaded inserts tangfree with self-locking polygonal coils
| Marca |
Marca
KATO®
|
| Linea di prodotti |
Linea di prodotti
2TL
|
| Materiale |
Materiale
Stainless steel
|
| Tipo di materiale |
Tipo di materiale
1.4301
|
| Colore |
Colore
red colored
|
Všechny funkce
Nominal thread length is calculated and cannot be measured when not installed.
Funkce
| Marca |
Marca
KATO®
|
| Linea di prodotti |
Linea di prodotti
2TL
|
| Materiale |
Materiale
Stainless steel
|
| Tipo di materiale |
Tipo di materiale
1.4301
|
| Colore |
Colore
red colored
|
Istruzioni per il montaggio
1. Drill the hole.
2. Cut the thread
3. Check the tapped thread
4. Install the threaded insert
5. Final check
Image 1: View from below of insert installation
The spring hook in the installation tool engages in the driver groove A to install the threaded insert without tang.The tapered ends of the insert allow it to be screwed into the prepared thread without difficulty.
Image 2: View of the installation tool releasing from the insert B.
On reversing direction of rotation, the driver hook C disengages and slides back into the installation tool.
Illustrazione istruzioni per il montaggio
Vhodné pro toto
BN 37983
KATO® 2CT10L - Utensili di montaggio per avvitatori elettrici e pneumatici per KATO® filetti riportati senza perno di trascinamento con autobloccanti a passo poligonale - Acciaio
BN 37990
KATO® 2CT30L - Utensili di smontaggio per avvitatori elettrici e pneumatici per KATO® filetti riportati senza perno di trascinamento con autobloccanti a passo poligonale - Ocel