Pozi flat countersunk head thread forming screws type M, form Z, metric thread
BN 3327
DIN 7500 M
~UNI 8113
| Headform |
Headform
Countersunk head 90°
|
| Drive |
Drive
Cross recess Z (Pozidriv)
|
| Thread |
Thread
fully threaded
|
| Material |
Material
Steel
|
| Material execution |
Material execution
case-hardened
|
| Surface |
Surface
zinc plated blue, added lubricant
|
| Hardness |
Hardness
450-560 HV
|
Toutes les caractéristiques
1) Tapered thread end max. 4P
2) Trilobular cross-section
Standard
DIN 7500 M
~UNI 8113
Informations complémentaires
Utilisation: acier, aluminium, aluminium coulé sous pression, zamak, métaux non-ferreux.
Dimensionner les fraisures selon les normes correspondantes!
Documentation disponible sur demande.
Dimensionner les fraisures selon les normes correspondantes!
Documentation disponible sur demande.
Caractéristiques
| Headform |
Headform
Countersunk head 90°
|
| Drive |
Drive
Cross recess Z (Pozidriv)
|
| Thread |
Thread
fully threaded
|
| Material |
Material
Steel
|
| Material execution |
Material execution
case-hardened
|
| Surface |
Surface
zinc plated blue, added lubricant
|
| Hardness |
Hardness
450-560 HV
|
Avertissements
ISO 4042
Quenched and tempered fasteners ≥ 360 HV and tempered case-hardened fasteners with electroplated coatings: Susceptible to hydrogen embrittlement!
Further notice to residual risks can be found on our web page: Notes on use