Senkschrauben mit Innensechskant, ohne Schaft
BN 1422
DIN 7991
(Norm zurückgezogen)
~ISO 10642
~UNI 5933
| Kopfform |
Kopfform
Senkkopf 90°
|
| Antrieb |
Antrieb
Innensechskant
|
| Schaft |
Schaft
ohne Schaft
|
| Werkstoff |
Werkstoff
Stahl
|
| Festigkeitsklasse |
Festigkeitsklasse
010.9 / 10.9 (Die Kopfmarkierung ist bestimmend)
|
| Oberfläche |
Oberfläche
Zinklamellen beschichtet ISO 10683/flZnL/nc/480h/C (µ=0.12-0.18)
|
All features
All prices are based on the minimum order quantity. If you have any questions or special requirement, please contact Bossard.
Standard
Additional information
Fasteners to the given specification have a reduced loadability due to the head geometry according to ISO 898-1.
The general change-over from DIN 7991 to ISO 10642 in the practice requires a verification of the application.
Features
| Kopfform |
Kopfform
Senkkopf 90°
|
| Antrieb |
Antrieb
Innensechskant
|
| Schaft |
Schaft
ohne Schaft
|
| Werkstoff |
Werkstoff
Stahl
|
| Festigkeitsklasse |
Festigkeitsklasse
010.9 / 10.9 (Die Kopfmarkierung ist bestimmend)
|
| Oberfläche |
Oberfläche
Zinklamellen beschichtet ISO 10683/flZnL/nc/480h/C (µ=0.12-0.18)
|
Montagehinweise
Das Bezeichnungssystem nach ISO 10683 legt den zu erwartenden Korrosionsschutz und das Reibwertfenster fest. Weitere Leistungsspezifikationen einer eingesetzten Beschichtungsmarke gelten als nicht vereinbart. Durch die zusätzliche Gewinde-Beschichtung kann unter Umständen die Montagefähigkeit von Hand bei zinklamellenbeschichteten Schrauben < M5 eingeschränkt sein.
Warnhinweis
BN 20 - DIN 7991 - ~ISO 10642
Hex socket flat countersunk head screws fully threaded - Steel - 010.9 / 10.9 (The head marking is determining) - black
BN 2103 - ISO 10642 - ~DIN 7991
Hex socket flat countersunk head screws fully threaded - Steel - 010.9 / 10.9 (The head marking is determining) - Zinc flake coated ISO 10683/flZnL/nc/480h/C (µ=0.12-0.18)