Pozi pan head tapping screws form Z, with flat end type F
BN 14065
DIN 7981 F
(Standard withdrawn)
~ISO 7049
~UNI 6954 B
~ČSN 021235
| Headform |
Headform
Pan Head
|
| Drive |
Drive
Cross recess Z (Pozidriv)
|
| Thread |
Thread
fully threaded
|
| Material |
Material
Steel
|
| Material execution |
Material execution
case-hardened
|
| Surface |
Surface
zinc plated blue
|
| Hardness |
Hardness
450 HV
|
Todas las características
Norma
Características
| Headform |
Headform
Pan Head
|
| Drive |
Drive
Cross recess Z (Pozidriv)
|
| Thread |
Thread
fully threaded
|
| Material |
Material
Steel
|
| Material execution |
Material execution
case-hardened
|
| Surface |
Surface
zinc plated blue
|
| Hardness |
Hardness
450 HV
|
Warnings
ISO 4042
Quenched and tempered fasteners ≥ 360 HV and tempered case-hardened fasteners with electroplated coatings: Susceptible to hydrogen embrittlement!
Further notice to residual risks can be found on our web page: Notes on use
BN 30905 - BS 4174
Tornillos autorroscantes con cabeza cilíndrica abombada con valona hueco cruciforme Pozidriv tipo Z y extremo plano tipo F - Acero - cementado templado - cincado pasivado azul
BN 33 - DIN 7981 F - ~ISO 7049
Tornillos autorroscantes con cabeza cilíndrica redondeada con hueco cruciforme Phillips tipo H y extremo plano tipo F - Acero - cementado templado - cincado pasivado azul
BN 992 - DIN 7971 F - ~ISO 1481
Tornillos autorroscantes con cabeza cilíndrica redondeada ranurada y extremo plano forma F - Acero - cementado templado - cincado pasivado azul