PEINER
BN 97 - Sets of heavy hex structural bolts HV with hex head screw, nut and washers
EN 14399-1
Informations sur les produits: www.peiner-ut.com
Autres documentations: www.Bossard.com
| Headform |
Headform
Hexagon
|
| Drive |
Drive
Hexagon
|
| Thread |
Thread
partially threaded
|
| Brand |
Brand
PEINER
|
| Material |
Material
Steel
|
| Property class |
Property class
10.9
|
| Surface |
Surface
hot dip galvanized
|
| Notes on use |
Notes on use
|
Toutes les caractéristiques
Standard
EN 14399-1
Caractéristiques de produit
Informations sur les produits: www.peiner-ut.com
Autres documentations: www.Bossard.com
Caractéristiques
| Headform |
Headform
Hexagon
|
| Drive |
Drive
Hexagon
|
| Thread |
Thread
partially threaded
|
| Brand |
Brand
PEINER
|
| Material |
Material
Steel
|
| Property class |
Property class
10.9
|
| Surface |
Surface
hot dip galvanized
|
| Notes on use |
Notes on use
|
Scope of supply
Sets of heavy hex structural bolts consist of:
1 bolt EN 14399-4 steel 10.9
1 nut EN 14399-4 steel 10
2 washers EN 14399-6 Steel 300 HV
nut lubricated k-class: K1
Illustration functional principle
Assembly notice
The HV nuts are lubricated for installation. Correct installation is achieved by screwing on the HV nut EN 14399-4 with the corresponding HV bolt EN 14399-4 and HV washers EN 14399-6. Pairing of the same make ensures the correct matching and the intended tightening behaviour. Additional lubrication of bolts, nuts and washers changes the preload parameters and causes assembly errors.