LOCKFIL®+ SL
BN 37644 - Wire threaded inserts with tang with self-locking polygonal coils
| Brand |
Brand
LOCKFIL®+
|
| Brandtype |
Brandtype
SL
|
| Material |
Material
Stainless steel
|
| Material type |
Material type
1.4301
|
| Color |
Color
red colored
|
Wszystkie cechy
D = nominal length (not assembled, approx. 1/3 shorter) / E = usable length without tang / F = usable length with tang / T = drillied hole depth min.
Cechy
| Brand |
Brand
LOCKFIL®+
|
| Brandtype |
Brandtype
SL
|
| Material |
Material
Stainless steel
|
| Material type |
Material type
1.4301
|
| Color |
Color
red colored
|
Assembly notice
1. Drilling the core hole:
Observe the bore diameter! If possible, do not chamfer the hole.
2. Screw thread:
Use taps provided for the selected size.
3. Check tapping hole:
If necessary, check with mandrel.
4. Installation:
The threaded insert can be screwed directly into the thread. The wire end should be turned into the workpiece surface at least 1/4 of a turn.
5. Drive pins:
To create a through hole, the drive pin is broken with the pin breaker. In the case of ground hole threads, the stud can be adjusted to the max. Screw – in depth remains in the thread.
6. Check the thread:
After setting the thread inserts, check with the thread gauge (optional) .
Illustration assembly
Odpowiednie do tego
BN 37655
Hand installation tools with crank handle completely equipped for FILTEC®+ / LOCKFIL®+ wire threaded inserts with tang - Steel
BN 56215
Umbau- und Ersatzeinheiten für manuelle Einbauwerkzeuge mit Kurbelantrieb für FILTEC®+ / LOCKFIL®+ Drahtgewindeeinsätze mit Mitnehmerzapfen - Steel
BN 37733
Hand installation tools for FILTEC®+ / LOCKFIL®+ wire threaded inserts with tang - Steel
BN 31870
Narzędzia montażowe do wkrętarek elektrycznych i pneumatycznych do LOCKFIL®+ wkładki gwintowe z drutu ze sworzniem zabierającym - Stal
BN 37647
Gwintownik ręczny do FILTEC®+ / LOCKFIL®+ / KATO® wkładek gwintowych z drutu - Stal
BN 37650
Gwintownik maszynowy do gwintów przelotowych do FILTEC®+ / LOCKFIL®+ / KATO® wkładek gwintowych z drutu - Stal
BN 37651
Gwintownik maszynowy do z otworem gwintowanym nieprzelotowym do FILTEC®+ / LOCKFIL®+ / KATO® wkładek gwintowych z drutu - Stal
BN 37664
Ręczny łamacz czopów do FILTEC®+ / LOCKFIL®+ wkładki gwintowe z drutu ze sworzniem zabierającym - Stal