KATO® 2TN
BN 37972 - Wire threaded inserts tangfree with free running thread
| Marke |
Marke
KATO®
|
| Produktlinie |
Produktlinie
2TN
|
| Material |
Material
Stainless steel
|
| Material type |
Material type
1.4301
|
| Farbe |
Farbe
colorless
|
Alle Eigenschaften
Nominal thread length is calculated and cannot be measured when not installed.
Eigenschaften
| Marke |
Marke
KATO®
|
| Produktlinie |
Produktlinie
2TN
|
| Material |
Material
Stainless steel
|
| Material type |
Material type
1.4301
|
| Farbe |
Farbe
colorless
|
Assembly notice
1. Drill the hole.
2. Cut the thread
3. Check the tapped thread
4. Install the threaded insert
5. Final check
Image 1: View from below of insert installation
The spring hook in the installation tool engages in the driver groove A to install the threaded insert without tang.The tapered ends of the insert allow it to be screwed into the prepared thread without difficulty.
Image 2: View of the installation tool releasing from the insert B.
On reversing direction of rotation, the driver hook C disengages and slides back into the installation tool.
Illustration assembly
Hierfür geeignet
BN 37982
KATO® 2CT10F - Montagewerkzeuge für Elektro- und Pneumatikschrauber für KATO® Drahtgewindeeinsätze ohne Mitnehmerzapfen mit frei durchlaufendem Gewinde - Stahl
BN 37989
KATO® 2CT30F - Demontagewerkzeuge für Elektro- und Pneumatikschrauber für KATO® Drahtgewindeeinsätze ohne Mitnehmerzapfen mit frei durchlaufendem Gewinde - Stahl