1. Manually screw the KEENSEERTS® threaded insert on the mandrel using 2 - 3 turns.

2. Attach the installation tool, including the spigot, and turn it until the key locks snap in the bore hole. Continue the screwing process until the KEENSEERTS® threaded insert is fully screwed in.

3. Hitting the tool with a hammer, drive the snapped in key locks in until they touch the material.

4. Slightly lift the tool and it turn clockwise by about 45°.

5. Hitting the tool with a hammer, drive the keylocks in completely until the tool is once again flush with the surface.

6. Installation complete.