LOCKFIL®+ SL
BN 37644 - Wire threaded inserts with tang with self-locking polygonal coils
모든 제품 가격은 최소 주문 수량(MOQ)이 기준이 됩니다. 관련하여 가격관련하여 문의사항 있으시면 저희 한국보싸드로 문의바랍니다.
D = nominal length (not assembled, approx. 1/3 shorter) / E = usable length without tang / F = usable length with tang / T = drillied hole depth min.
스펙
| Brand |
Brand
LOCKFIL®+
|
| Brandtype |
Brandtype
SL
|
| Material |
Material
Stainless steel
|
| Material type |
Material type
1.4301
|
| Color |
Color
red colored
|
Assembly notice
1. Drilling the core hole:
Observe the bore diameter! If possible, do not chamfer the hole.
2. Screw thread:
Use taps provided for the selected size.
3. Check tapping hole:
If necessary, check with mandrel.
4. Installation:
The threaded insert can be screwed directly into the thread. The wire end should be turned into the workpiece surface at least 1/4 of a turn.
5. Drive pins:
To create a through hole, the drive pin is broken with the pin breaker. In the case of ground hole threads, the stud can be adjusted to the max. Screw – in depth remains in the thread.
6. Check the thread:
After setting the thread inserts, check with the thread gauge (optional) .