KATO® 2TN
BN 37972 - Wire threaded inserts tangfree with free running thread
| Brand |
Brand
KATO®
|
| Brandtype |
Brandtype
2TN
|
| Material |
Material
Stainless steel
|
| Material type |
Material type
1.4301
|
| Color |
Color
colorless
|
All features
All prices are based on the minimum order quantity. If you have any questions or special requirement, please contact Bossard.
Nominal thread length is calculated and cannot be measured when not installed.
Features
| Brand |
Brand
KATO®
|
| Brandtype |
Brandtype
2TN
|
| Material |
Material
Stainless steel
|
| Material type |
Material type
1.4301
|
| Color |
Color
colorless
|
Assembly notice
1. Drill the hole.
2. Cut the thread
3. Check the tapped thread
4. Install the threaded insert
5. Final check
Image 1: View from below of insert installation
The spring hook in the installation tool engages in the driver groove A to install the threaded insert without tang.The tapered ends of the insert allow it to be screwed into the prepared thread without difficulty.
Image 2: View of the installation tool releasing from the insert B.
On reversing direction of rotation, the driver hook C disengages and slides back into the installation tool.
Illustration assembly
Suitable for this
BN 37982
KATO® 2CT10F - Installation tools for electric and pneumatic screwdriver for KATO® wire threaded inserts tangfree with free running thread - Steel
BN 37989
KATO® 2CT30F - Removal tools for electric and pneumatic screwdriver for KATO® wire threaded inserts tangfree with free running thread - Steel