KEENSERTS® KNT 01/03 - Hand insertion tools for inserts with locking kees heavy duty KNHM / KNHML

BN 2086
Overlay

1

/3

KEENSERTS® KNT 01/03 - Hand insertion tools for inserts with locking kees heavy duty KNHM / KNHML

BN 2086
Brand
KEENSERTS®
Brandtype
KNT 01/03
Material
Steel

Montering

1. Screw the KEENSERTS® inserts onto the threaded pin of the KNT – Tool.

2. Screw the KEENSERTS® inserts in workpiece with KNT - Tool until the locking kees stop at the chamfer (recommended hole preparation)

3. Drive the kees with short and precise hammer strokes or via press ca. 1/3 in the workpiece. The kees can be controlled after each stroke.

4. Drive in the kees completely until they are flushed with the surface (end position)

5. Unscrew the KNT - Tool. The KEENSERTS® inserts is installed.

Varianter