Montering
1. Drill or die-cast the pilot hole
2. The screw cuts its own internal thread in the pilot hole
3. The self cutting screw is tightened. The pilot hole depth must be aligned (chips)
4. After the self-tapping screw is removed, the internal thread is clearly visible
Säkerhetsinstruktioner
Transport och lagring
ISO 4042
Quenched and tempered fasteners ≥ 360 HV and tempered case-hardened fasteners with electroplated coatings: Susceptible to hydrogen embrittlement!
Further notice to residual risks can be found on our web page: Notes on use