Description
Product features
- Crimping force max. 15 kN
- Crimping cycle < 1.5 s (based on connection material)
- Number of crimps approx. 300 for 10 mm² Cu DIN 46234 / per battery charge
- Battery voltage 10,8 V with charge status display
- Battery capacity 2,5 Ah, Li-Ion (27 Wh)
- Battery charging time ca. 40 min.
- Ambient temperature -10 °C … + 40 °C
- Excellent crimping results with minimum effort
- The Klauke micro with intuitive PowerSense function combines the benefits of manual crimping tools with the convenience of battery powered hydraulic crimping tools
- Simple and safe: one-button operating concept for controlling all tool functions
- Electronic control with locking function monitors full closing of the dies
- Simple and safe, automatic retraction after operation completed
- Manual retract as required
- Motor stall protection
- Ergonomic 2C housing in the Klauke "In-line Design"
- Fastening eye for use with balancer or as fall protection in field applications
- Very low weight and high speed for maximum efficiency
- Powerful drive technology for fatigue proof operations
- LED for work area illumination
- Maintenance display via LED
- Project-based reporting with Klauke i-press® software package
Product information, operating manual, approval, more crimping dies for contact parts: www.klauke.com
Additional information
The Klauke micro with intuitive PowerSense function combines the benefits of manual crimping tools with the convenience of battery powered hydraulic crimping tools, Project-based reporting with Klauke i-press® software package.
Safety Instructions
UN number
UN-3481 Lithium-ion batteries contained in equipment or lithium-ion batteries packed with equipment (including lithium-ion polymer batteries)
Transportation and storage
Correct handling, transport and use of battery-powered products requires knowledge of the applicable laws.
Further notes on residual risks can be found on our web page: Notes on use
Special attention must be paid to the safety precautions and warnings given on the packaging or the instructions given in the operating manual / Safety Data Sheet.
Transports generally take place according to ADR 3.3 in accordance with the conditions of Special Regulation 188. The delivery document specifies the handling.
Scope of Supply
1 Electromechanical crimping tool
1 Crimping die IS5071 for insulated connector 0.5-6 mm²
1 Akku RAML1225 10,8 V / 2,5 Ah, Li-Ion (27 Wh)
1 Charger LGML1 for 10.8 V Li-Ion batteries, 230V
1 Hard plastic carrying case KKEK50ML
1 Manual