설명
추가 정보
Coating angle α in the screw body area approx. 90°. Edge zone (spray transition) up to 180°. Coating length l1 = ~ 4 to 6 thread turns. Around 1 to 2 thread turns remain uncoated to ensure flawless installation (l2).안전 지침
운송 및 보관
ISO 4042
Quenched and tempered fasteners ≥ 360 HV and tempered case-hardened fasteners with electroplated coatings: Susceptible to hydrogen embrittlement!
Further notes on residual risks can be found on our web page: Notes on use
Set screws are not intended to be tensile-loaded.