KEENSERTS® KNT 01 - Hand insertion tools for inserts with locking kees light duty KNM / KNML

BN 2085
Overlay

1

/3

KEENSERTS® KNT 01 - Hand insertion tools for inserts with locking kees light duty KNM / KNML

BN 2085
Brand
KEENSERTS®
Brandtype
KNT 01
Material
Steel

조립

1. Screw the KEENSERTS® inserts onto the threaded pin of the KNT – Tool.

2. Screw the KEENSERTS® inserts in workpiece with KNT - Tool until the locking kees stop at the chamfer (recommended hole preparation)

3. Drive the kees with short and precise hammer strokes or via press ca. 1/3 in the workpiece. The kees can be controlled after each stroke.

4. Drive in the kees completely until they are flushed with the surface (end position)

5. Unscrew the KNT - Tool. The KEENSERTS® inserts is installed.

변형