Montering
1. Applying 2. Thread forming 3. Tightening
Funktionsprincip
SHEEttracs® is a self tapping screw for safe mounting of thin sheet metal joints with pilot hole.
Compatibility with metrics screws.
Pilot hole recommendations for thin sheets made of cold rolled, soft steel acc. to EN 10130
Säkerhetsinstruktioner
Transport och lagring
ISO 4042
Quenched and tempered fasteners ≥ 360 HV and tempered case-hardened fasteners with electroplated coatings: Susceptible to hydrogen embrittlement!
Further notice to residual risks can be found on our web page: Notes on use