TufLok® and Nytemp® Patch

Features:

• High locking effectivness
• Suitable for adjusting screws
• Can be re-used several times
• No curing time, can be used immediately
• For almost all metals
• Unlimited shelf life
• Resistant to alcohol, oil, gasoline and almost all thinner
• Checking according to DIN 267, part 28
• Checking according to DIN EN ISO 2320
• Client inspection parts with torque specifications
• Patch coverage as defined in works standard 900.1

 Internal thread must have a countersink (no sharp-edged threads inserts), otherwise the patch could be peeled off when the screw is installed. Nytemp^® can only be used on plain or phosphate parts and on stainless steel due to the higher coating temperature.

 Securing screws with TufLok^®/Nytemp^® Patch. Threaded seal with TufLok^®/Nytemp^® all-round. Free threads on thread end enable easy installation. 2-3 threads underneath the head should not be patched.

Threaded parts from M1 to M68. Lengths up to 220 mm. Nuts from M5 to M12.

TufLok^® Patch

• Color blue
• Temperature range –56 °C to 120 °C

Nytemp^® Patch

• Color orange
• Temperature range –56 °C to 200 °C

Typical patch dimensions:

• Coating in the core area ~90°
• Edge zone (spray transition) up to ~180°
• Length l1: ~4 to 6 threads
• Length l2: ~2 to3 threads