FILTEC®+ 127

BN 37770 - Wire threaded inserts with tang with free running thread

Brand	Brand FILTEC®+
Brandtype	Brandtype 127
Material	Material Stainless steel
Material type	Material type 1.4301
Couleur	Couleur colorless

All features

Product variants

D = nominal length (not assembled, approx. 1/3 shorter) / E = usable length without tang / F = usable length with tang / T = drillied hole depth min.

Features

Brand	Brand FILTEC®+
Brandtype	Brandtype 127
Material	Material Stainless steel
Material type	Material type 1.4301
Couleur	Couleur colorless

1. Drilling the core hole:
Observe the bore diameter! If possible, do not chamfer the hole.
2. Screw thread:
Use taps provided for the selected size.
3. Check tapping hole:
If necessary, check with mandrel.
4. Installation:
The threaded insert can be screwed directly into the thread. The wire end should be turned into the workpiece surface at least 1/4 of a turn.
5. Drive pins:
To create a through hole, the drive pin is broken with the pin breaker. In the case of ground hole threads, the stud can be adjusted to the max. Screw – in depth remains in the thread.
6. Check the thread:
After setting the thread inserts, check with the thread gauge (optional) .

Suitable for this

BN 37655

Outils de pose manuels avec entraînement par manivelle complètement équipé pour FILTEC®+ / LOCKFIL®+ filets rapportés avec ergot d'entraînement - Acier

BN 56215

Ensembles de transformation et de rechange pour outils de pose manuels avec entraînement par manivelle pour FILTEC®+ / LOCKFIL®+ filets rapportés avec ergot d'entraînement - Acier