FRIEDBERG
BN 14001 - Heavy hex head bolts HV
EN 14399-4
| Headform |
Headform
Hexagon
|
| Drive |
Drive
Hexagon
|
| Thread |
Thread
partially threaded
|
| Brand |
Brand
FRIEDBERG
|
| Material |
Material
Steel
|
| Property class |
Property class
10.9
|
| Surface |
Surface
hot dip galvanized
|
| Notes on use |
Notes on use
|
Al produktinformation
Standard
Produktbeskrivelse
Produktinformation
| Headform |
Headform
Hexagon
|
| Drive |
Drive
Hexagon
|
| Thread |
Thread
partially threaded
|
| Brand |
Brand
FRIEDBERG
|
| Material |
Material
Steel
|
| Property class |
Property class
10.9
|
| Surface |
Surface
hot dip galvanized
|
| Notes on use |
Notes on use
|
Illustration functional principle
Assembly notice
The HV nuts are lubricated for installation. Correct installation is achieved by screwing on the HV nut EN 14399-4 with the corresponding HV bolt EN 14399-4 and HV washers EN 14399-6. Pairing of the same make ensures the correct matching and the intended tightening behaviour. Additional lubrication of bolts, nuts and washers changes the preload parameters and causes assembly errors.
Warnings
Heavy hex bolting assemblies are designed for high strength structural joints and are subject to specific regulations. Bolts are to be used with nuts EN 14399-4 and washers 14399-6.
Individual replacement of parts is not recommended.
BN 14000 - EN 14399-1
FRIEDBERG - HV-boltesæt med sekskantskrue, møtrik og skive - Stål - 10.9 - varmgalvaniseret
BN 14002 - EN 14399-4
FRIEDBERG - Sekskantmøtrikker HV til højstyrke konstruktionsbolte HV - Stål - 10 - varmgalvaniseret
BN 14003 - EN 14399-6
FRIEDBERG - Plane skiver med facet HV til HV sekskantskruer og møtrikker - Stål - varmgalvaniseret