Ensat® S 302
BN 20346 - Self-cutting thread inserts with cutting slot, for light metals, thermoplastics and thermoset plastics
| Hovedform |
Hovedform
Unheaded
|
| Marke |
Marke
Ensat®
|
| Produktlinie |
Produktlinie
S 302
|
| Material |
Material
Steel
|
| Material execution |
Material execution
case-hardened
|
| Surface |
Surface
zinc plated blue
|
Al produktinformation
Produktinformation
| Hovedform |
Hovedform
Unheaded
|
| Marke |
Marke
Ensat®
|
| Produktlinie |
Produktlinie
S 302
|
| Material |
Material
Steel
|
| Material execution |
Material execution
case-hardened
|
| Surface |
Surface
zinc plated blue
|
Assembly notice
1. Drill the hole
2. Drive the insert into the workpiece (insert is cutting its own thread)
3. Disengage assembly tool
Illustration assembly
Advarsler
ISO 4042
Quenched and tempered fasteners ≥ 360 HV and tempered case-hardened fasteners with electroplated coatings: Susceptible to hydrogen embrittlement!
Further notice to residual risks can be found on our web page: Notes on use
Kan anvendes med
BN 1181
Ensat® 610 - Manuelt montageværktøj til selvskærende gevindindsatse - Stål
BN 1182
Ensat® 620 - Monteringsværktøj til el- og trykluftskruetrækker til selvskærende gevindindsatse - Stål