KATO® 2TN
BN 37972 - Wire threaded inserts tangfree with free running thread
| Marca |
Marca
KATO®
|
| Marca |
Marca
2TN
|
| Material |
Material
Stainless steel
|
| Material type |
Material type
1.4301
|
| Color |
Color
colorless
|
Todas las características
Nominal thread length is calculated and cannot be measured when not installed.
Características
| Marca |
Marca
KATO®
|
| Marca |
Marca
2TN
|
| Material |
Material
Stainless steel
|
| Material type |
Material type
1.4301
|
| Color |
Color
colorless
|
Assembly notice
1. Drill the hole.
2. Cut the thread
3. Check the tapped thread
4. Install the threaded insert
5. Final check
Image 1: View from below of insert installation
The spring hook in the installation tool engages in the driver groove A to install the threaded insert without tang.The tapered ends of the insert allow it to be screwed into the prepared thread without difficulty.
Image 2: View of the installation tool releasing from the insert B.
On reversing direction of rotation, the driver hook C disengages and slides back into the installation tool.
Illustration assembly
Adecuado para
BN 37982
KATO® 2CT10F - Herramienta de montaje para destornillador eléctrico y neumático para KATO® insertos roscados de alambre sin passador, con rosca de paso libre - Acero
BN 37989
KATO® 2CT30F - Herramienta de desmontaje de destornillador eléctrico y neumático para KATO® insertos roscados de alambre sin passador, con rosca de paso libre - Acero