KEENSERTS® KNT 01
BN 2085 - Outils de pose manuels pour douilles filetées avec clavettes série légère KNM / KNML
| Marca |
Marca
KEENSERTS®
|
| Linea di prodotti |
Linea di prodotti
KNT 01
|
| Material |
Material
Steel
|
All features
All prices are based on the minimum order quantity. If you have any questions or special requirement, please contact Bossard.
Features
| Marca |
Marca
KEENSERTS®
|
| Linea di prodotti |
Linea di prodotti
KNT 01
|
| Material |
Material
Steel
|
Istruzioni per il montaggio
1. Screw the KEENSERTS® inserts onto the threaded pin of the KNT – Tool.
2. Screw the KEENSERTS® inserts in workpiece with KNT - Tool until the locking kees stop at the chamfer (recommended hole preparation)
3. Drive the kees with short and precise hammer strokes or via press ca. 1/3 in the workpiece. The kees can be controlled after each stroke.
4. Drive in the kees completely until they are flushed with the surface (end position)
5. Unscrew the KNT - Tool. The KEENSERTS® inserts is installed.