KOENIG EXPANDER® EXPRESS 3000

BN 26280 - Pressa oleopneumatica da banco con controllo della forza e della corsa

for the installation of KOENIG EXPANDER® series MB from Ø 3 - 10 mm (.093" - .375" Inch), series CV from Ø 3 - 10 mm, series LP from Ø 3 - 10 mm and series RE from Ø 4 - 10 mm (.156" - .375" Inch)
Height: approx. 1360 mm
Width: approx. 340 mm (max. 530 mm)
Depth: approx. 495 mm
Working area (height): 250 mm (working height between table top and cylinder, without setting tool)
Working area (depth): 200 mm (center-line spacing between cylinder and C frame)
Table (width x depth): 220 x 160 mm
Weight: approx. 140 kg
Compressive force: 30 kN (max force 29.5 kN at 6 bar)
Cylinder ram: 60 mm
Working stroke: 10 mm (within the cylinder ram)
Working speed: 40 mm/sec (max. possible at 6 bar)
Operating voltage: 230 V/110 V, Automatic switchover to corresponding power supply
Operation: VISUAL POINT terminal with QVGA graphic display
Force / distance control: Sensor adjusted with SIT reference sensor
Software: WINSCOPE software for connection to a PC

Per saperne di più

Brand	Brand KOENIG EXPANDER®
Brandtype	Brandtype EXPRESS 3000
Material	Material Multiple Materials

Tutte le caratteristiche

Varianti di prodotto

Net price per piece

Caratteristiche

for the installation of KOENIG EXPANDER® series MB from Ø 3 - 10 mm (.093" - .375" Inch), series CV from Ø 3 - 10 mm, series LP from Ø 3 - 10 mm and series RE from Ø 4 - 10 mm (.156" - .375" Inch)
Height: approx. 1360 mm
Width: approx. 340 mm (max. 530 mm)
Depth: approx. 495 mm
Working area (height): 250 mm (working height between table top and cylinder, without setting tool)
Working area (depth): 200 mm (center-line spacing between cylinder and C frame)
Table (width x depth): 220 x 160 mm
Weight: approx. 140 kg
Compressive force: 30 kN (max force 29.5 kN at 6 bar)
Cylinder ram: 60 mm
Working stroke: 10 mm (within the cylinder ram)
Working speed: 40 mm/sec (max. possible at 6 bar)
Operating voltage: 230 V/110 V, Automatic switchover to corresponding power supply
Operation: VISUAL POINT terminal with QVGA graphic display
Force / distance control: Sensor adjusted with SIT reference sensor
Software: WINSCOPE software for connection to a PC

Quick tool change avoids long changeover times. The required working stroke is preprogrammed and can be retrieved by the Expander type to be processed (max. 32 memory locations). In addition, the working stroke is referenced for each individual Expander, which guarantees high process stability and quality. The press is force and distance controlled; an RS232 interface can be used to trace corresponding data on the customer's computer for later processing. The required software is included in the scope of delivery.