Klauke® EK 30 IDML
BN 27741 - Akkuhydraulisches Presswerkzeug mit Akku-System Pressbereich 6-120 mm²
- Very well suited for compacted conductors
- Especially for stranded conductors according to DIN EN 60228
- Crimping force 30 kN
- Stroke / opening width 22 mm
- Crimping cycle 2.5 s to 5 s (depending on press cross-section)
- Battery voltage 10.8 V
- Battery capacity 2,5 Ah, Li-Ion (27 Wh)
- Battery charging time 45 min
- Ambient temperature -10 °C ... + 40 °C
- UL-file n° E244184
Marque |
Marque
Klauke®
|
Ligne de produit |
Ligne de produit
EK 30 IDML
|
Matière |
Matière
Plusieurs matériaux
|
Numéro ONU |
Numéro ONU
|
Indications d'utilisation |
Indications d'utilisation
Indications d'utilisation
|
All features
Prix net par pièce
Product features
- Very well suited for compacted conductors
- Especially for stranded conductors according to DIN EN 60228
- Crimping force 30 kN
- Stroke / opening width 22 mm
- Crimping cycle 2.5 s to 5 s (depending on press cross-section)
- Battery voltage 10.8 V
- Battery capacity 2,5 Ah, Li-Ion (27 Wh)
- Battery charging time 45 min
- Ambient temperature -10 °C ... + 40 °C
- UL-file n° E244184
Additional information
Closed head, hinged, rotatable
Simple and safe: one-button operating concept for controlling all tool functions
Comfortable and secure one-hand operation thanks to 2-component plastic housing with soft lining
Effortless working due to balanced centre of gravity
Automatic retraction when operation is complete
Maintenance display via LED
Features
Marque |
Marque
Klauke®
|
Ligne de produit |
Ligne de produit
EK 30 IDML
|
Matière |
Matière
Plusieurs matériaux
|
Numéro ONU |
Numéro ONU
|
Indications d'utilisation |
Indications d'utilisation
Indications d'utilisation
|
Contenu de la livraison
1 Outil de sertissage hydraulique à accu
1 Accu RAML1225 10,8 V / 2,5 Ah, Li-Ion (27 Wh)
1 Chargeur LGML1 pour 10,8 V Li-Ion accus, 230V
1 Boîtier de transport en plastique KKML
1 Manuel d'instructions
Avertissements
La manipulation correcte, lors du transport et de l’utilisation des produits fonctionnant avec batterie nécessitent une connaissance des lois en vigueur.
D’autres remarques sur les risques résiduels sont mentionnées sur notre page web: Indications d'utilisation
Une attention particulière doit être accordée aux précautions et avertissements figurant sur l’emballage ou aux instructions données dans le manuel d’utilisation / la fiche de données de sécurité.
Les transports s'effectuent généralement selon l'ADR 3.3 conformément aux conditions du Règlement spécial 188. Le bulletin de livraison spécifie la manipulation.
Numéro ONU
UN-3481 Piles au lithium-ion contenues dans l'équipement ou piles au lithium-ion emballées avec l'équipement (y compris les piles au lithium-ion polymère)
Suitable for this
BN 27704
Klauke® - Tubular cable lugs standard type, without inspection hole - Copper - tin-plated
BN 27705
Klauke® - Tubular cable lugs standard type, with inspection hole - Copper - tin-plated
BN 27714
Klauke® - Tubular cable lugs for fine and superfine stranded round conductors - Copper - tin-plated
BN 27715
Klauke® - Tubular cable lugs with small tab - Copper - tin-plated
BN 27720
Klauke® - Tubular cable lugs Angle 45° - Copper - tin-plated
BN 27701
Klauke® - Tubular cable lugs standard type, with inspection hole, for small cross-sections - Copper - tin-plated
BN 27724
mecatraction DE-SV - Tubular cable lugs standard type, without inspection hole - Copper - tin-plated
BN 27723
mecatraction DE - Tubular cable lugs standard type, with inspection hole - Copper - tin-plated
BN 20395
BM - Compression cable lugs Standard type, with inspection hole - Copper - tin-plated
BN 27719
Klauke® - Tubular cable lugs Angle 90° - Copper - tin-plated
BN 22482
mecatraction DE-SV90E - Tubular cable lugs standard type, angle 90° - Copper - tin-plated
BN 22542 - DIN 46234
Solderless terminals ring type non insulated - Copper - tin-plated
BN 20374 - DIN 46234
BM - Solderless terminals ring type non insulated - Copper - tin-plated
BN 22541 - DIN 46234
Solderless terminals fork type non insulated - Copper - tin-plated
BN 22544 - DIN 46230
Pins terminals non insulated, flatpin - Copper - tin-plated
BN 22543 - DIN 46230
Pins terminals non insulated, roundpin - Copper - tin-plated
BN 27787
Klauke® RAML1225 - Replacement battery for crimping tools - Multiple Materials
BN 27764
Klauke® LGML1 - Charger for battery 10,8 V - Multiple Materials