Klauke®
BN 27710 - Non-Tension compression joints
DIN 46267-1
- Simple and safe processing due to butt mark
- Annealed material optimises material and crimping properties
- With code number for clear tool assignment
- With crimp markings for correct crimp positioning
| Varemærke |
Varemærke
Klauke®
|
| Materiale |
Materiale
Kobber
|
| Overflade |
Overflade
rå
|
| Bemærkninger om brug |
Bemærkninger om brug
|
All features
All prices are based on the minimum order quantity. If you have any questions or special requirement, please contact Bossard.
10-800 mm² IEC-tested
Standard
Product features
- Simple and safe processing due to butt mark
- Annealed material optimises material and crimping properties
- With code number for clear tool assignment
- With crimp markings for correct crimp positioning
Additional information
For round conductors, e.g. according to DIN EN 60228 Cl. 1, 2, 5 and 6
For non-tension copper cables, e.g. according to DIN 48201-1
For pre-rounded multi-stranded sector shaped conductors
With code number for clear tool assignment
Features
| Varemærke |
Varemærke
Klauke®
|
| Materiale |
Materiale
Kobber
|
| Overflade |
Overflade
rå
|
| Bemærkninger om brug |
Bemærkninger om brug
|
Similar products
Suitable for this
BN 27728
Klauke® K 05 D - Syncro presseværktøj Til DIN 46235 preskabelsko og samlemuffer - Flere forskellige materialer
BN 27730
Klauke® EK 35/4 ML - Batteridrevet hydraulisk krympeværktøj med batterisystem presseområde 6-150 mm² - Flere forskellige materialer
BN 27734
Klauke® EK 12042 CFM - Batteridrevet hydraulisk krympeværktøj med Makita batterisystem presseområde 16-400 mm² - Flere forskellige materialer
BN 27735
Klauke® EK 12042 CFB - Battery powered hydraulic crimping tool with Bosch battery system crimping range 16-400 mm² - Multiple Materials
BN 27736
Klauke® EK 60/22 CFB - Battery powered hydraulic crimping tool with Bosch battery system
crimping range 6-300 mm² - Multiple Materials
BN 27738
Klauke® EK 60/22 CFM - Battery powered hydraulic crimping tool with Makita battery system crimping range 6-300 mm²
- Multiple Materials
BN 27751
Klauke® D 22 Set - Crimping die set in plastic carry case small for compression cable lugs to DIN 46235 - Brass
BN 27752
Klauke® R 22 Set - Crimping die set in plastic carry case small for tubular cable lugs - Brass
BN 27753
Klauke® F 22 - Crimping die small for tubular cable lugs for fine and superfine stranded round conductors - Brass
BN 27754
Klauke® D 22 - Crimping die small for compression cable lugs to DIN 46235 - Brass
BN 27755
Klauke® R 22 - Crimping die small for tubular cable lugs - Brass