TUBTARA® UFX (UT/FESG)

BN 5860 - Blind rivet nuts countersunk head, round shank, closed end

Technical information: Download (PDF)

Headform	Headform Countersunk head
Brand	Brand TUBTARA®
Brandtype	Brandtype UFX (UT/FESG)
Material	Material Steel
Surface	Surface zinc plated

All features

Product variants

All prices are based on the minimum order quantity. If you have any questions or special requirement, please contact Bossard.

Features

Technical information: Download (PDF)

Headform	Headform Countersunk head
Brand	Brand TUBTARA®
Brandtype	Brandtype UFX (UT/FESG)
Material	Material Steel
Surface	Surface zinc plated

The countersunk head rivet nut requires a perfect 90° countersink.

After the rivet nut is assembled, the flat head should protrude through the clamped part at least 0,1 mm. During tightening the component that's being fastened will press against the head, consequently preventing the rivet nut from rotating.

CAD-Download

Alternative products

BN 4577

TUBTARA® UFO (UT/FES) - Blind rivet nuts countersunk head, round shank, open end - Steel - zinc plated

Suitable for this

BN 14309

TUBTARA® MS 3 - Hand rivet setter fully equipped - Multiple Materials

BN 25054

TUBTARA® K1 - Hand rivet tool fully equipped without socket wrench - Multiple Materials

BN 55432

POP® ProSert® XTN20 - Hydropneumatic setting tool - Multiple Materials

BN 56258

STANLEY® Assembly Technologies NB08PT-18 - Battery-Powered Rivet Tool in T STAK™-kitbox, base tool without battery / charger - Multiple Materials

BN 55422

POP® PNT1000L-PC - Hydroppneumatic setting tool - Multiple Materials

Product features