KATO® 2TL
BN 37980 - Wire threaded inserts tangfree with self-locking polygonal coils
| Brand |
Brand
KATO®
|
| Brandtype |
Brandtype
2TL
|
| Material |
Material
Stainless steel
|
| Material type |
Material type
1.4301
|
| Color |
Color
red colored
|
Al produktinformation
Nominal thread length is calculated and cannot be measured when not installed.
Produktinformation
| Brand |
Brand
KATO®
|
| Brandtype |
Brandtype
2TL
|
| Material |
Material
Stainless steel
|
| Material type |
Material type
1.4301
|
| Color |
Color
red colored
|
Assembly notice
1. Drill the hole.
2. Cut the thread
3. Check the tapped thread
4. Install the threaded insert
5. Final check
Image 1: View from below of insert installation
The spring hook in the installation tool engages in the driver groove A to install the threaded insert without tang.The tapered ends of the insert allow it to be screwed into the prepared thread without difficulty.
Image 2: View of the installation tool releasing from the insert B.
On reversing direction of rotation, the driver hook C disengages and slides back into the installation tool.
Illustration assembly
Kan anvendes med
BN 37983
KATO® 2CT10L - Monteringsværktøj til el- og trykluftskruetrækker til KATO® Trådgevindindsatser uden medbringertap med selvlåsende med polygone vindinger - Stål
BN 37990
KATO® 2CT30L - Afmonteringsværktøj til el- og trykluftskruetrækker til KATO® trådgevindindsatse uden drivstift med selvlåsende polygone vindinger - Stål