KATO® 2TL
BN 37980 - Wire threaded inserts tangfree with self-locking polygonal coils
所有顯示價格均為最低訂購數量之報價，如果您需其他需求數量的報價或特殊要求及問題，請與我們聯繫。
Nominal thread length is calculated and cannot be measured when not installed.
產品資訊
| Brand |
Brand
KATO®
|
| Brandtype |
Brandtype
2TL
|
| Material |
Material
Stainless steel
|
| Material type |
Material type
1.4301
|
| Color |
Color
red colored
|
Assembly notice
1. Drill the hole.
2. Cut the thread
3. Check the tapped thread
4. Install the threaded insert
5. Final check
Image 1: View from below of insert installation
The spring hook in the installation tool engages in the driver groove A to install the threaded insert without tang.The tapered ends of the insert allow it to be screwed into the prepared thread without difficulty.
Image 2: View of the installation tool releasing from the insert B.
On reversing direction of rotation, the driver hook C disengages and slides back into the installation tool.
Illustration assembly
適用於
BN 37983
KATO® 2CT10L - 安裝工具 用於電動和氣動螺絲起子 適用KATO® 無導舌鋼絲螺紋護套與帶有自鎖的多邊形線圈 - 碳鋼
BN 37990
KATO® 2CT30L - 拆卸工具 用於電動和氣動螺絲起子 用於KATO® 帶多邊形防鬆螺旋圈的無導舌鋼絲螺紋護套 - 碳鋼