Klauke® EK 30 IDML
BN 27741 - Battery powered hydraulic crimping tool with battery system crimping range 6-120 mm²
- Very well suited for compacted conductors
- Especially for stranded conductors according to DIN EN 60228
- Crimping force 30 kN
- Stroke / opening width 22 mm
- Crimping cycle 2.5 s to 5 s (depending on press cross-section)
- Battery voltage 10.8 V
- Battery capacity 2,5 Ah, Li-Ion (27 Wh)
- Battery charging time 45 min
- Ambient temperature -10 °C ... + 40 °C
- UL-file n° E244184
| Brand |
Brand
Klauke®
|
| Brandtype |
Brandtype
EK 30 IDML
|
| Material |
Material
Multiple Materials
|
| Notes on use |
Notes on use
Notes on use
|
Alla funktioner
Net price per piece
Produktbeskrivning
- Very well suited for compacted conductors
- Especially for stranded conductors according to DIN EN 60228
- Crimping force 30 kN
- Stroke / opening width 22 mm
- Crimping cycle 2.5 s to 5 s (depending on press cross-section)
- Battery voltage 10.8 V
- Battery capacity 2,5 Ah, Li-Ion (27 Wh)
- Battery charging time 45 min
- Ambient temperature -10 °C ... + 40 °C
- UL-file n° E244184
Mer information
Closed head, hinged, rotatable
Simple and safe: one-button operating concept for controlling all tool functions
Comfortable and secure one-hand operation thanks to 2-component plastic housing with soft lining
Effortless working due to balanced centre of gravity
Automatic retraction when operation is complete
Maintenance display via LED
Funktioner
| Brand |
Brand
Klauke®
|
| Brandtype |
Brandtype
EK 30 IDML
|
| Material |
Material
Multiple Materials
|
| Notes on use |
Notes on use
Notes on use
|
Scope of supply
1 Battery powered hydraulic crimping tool
1 Battery RAML1225 10,8 V / 2,5 Ah, Li-Ion (27 Wh)
1 Charger LGML1 for 10.8 V Li-Ion batteries, 230V
1 Hard plastic carrying case KKML
1 Manual
Warnings
Correct handling, transport and use of battery-powered products requires knowledge of the applicable laws.
Further notes on residual risks can be found on our web page: Notes on use
Special attention must be paid to the safety precautions and warnings given on the packaging or the instructions given in the operating manual / Safety Data Sheet.
Transports generally take place according to ADR 3.3 in accordance with the conditions of Special Regulation 188. The delivery document specifies the handling.
Lämplig för detta
BN 27704
Klauke® - Tubular cable lugs standard type, without inspection hole - Měď - pocínováno
BN 27705
Klauke® - Trubková kabelová oka standardní, s kontrolním otvorem - Měď - pocínováno
BN 27714
Klauke® - Tubular cable lugs for fine and superfine stranded round conductors - Copper - tin-plated
BN 27715
Klauke® - Tubular cable lugs with small tab - Copper - tin-plated
BN 27720
Klauke® - Tubular cable lugs Angle 45° - Copper - tin-plated
BN 27701
Klauke® - Tubular cable lugs standard type, with inspection hole, for small cross-sections - Copper - tin-plated
BN 27724
mecatraction DE-SV - Tubular cable lugs standard type, without inspection hole - Copper - tin-plated
BN 27723
mecatraction DE - Tubular cable lugs standard type, with inspection hole - Copper - tin-plated
BN 20395
BM - Compression cable lugs Standard type, with inspection hole - Copper - tin-plated
BN 27719
Klauke® - Tubular cable lugs Angle 90° - Copper - tin-plated
BN 22482
mecatraction DE-SV90E - Tubular cable lugs standard type, angle 90° - Copper - tin-plated
BN 22542 - DIN 46234
Solderless terminals ring type non insulated - Copper - tin-plated
BN 20374 - DIN 46234
BM - Solderless terminals ring type non insulated - Copper - tin-plated
BN 22541 - DIN 46234
Solderless terminals fork type non insulated - Copper - tin-plated
BN 22544 - DIN 46230
Pins terminals non insulated, flatpin - Copper - tin-plated
BN 22543 - DIN 46230
Pins terminals non insulated, roundpin - Copper - tin-plated
BN 27787
Klauke® RAML1225 - Replacement battery for crimping tools - Multiple Materials
BN 27764
Klauke® LGML1 - Charger for battery 10,8 V - Multiple Materials