HALDER EH 22352.
BN 13400 - Threaded lifting pins self locking, with movable shackle
- Press button: aluminium, orange anodised
- Threaded element: stainless steel 1.4542, precipitation-hardened
- Spring: stainless steel
- Shackle: heat-treated steel, manganese phosphated
| Brand |
Brand
HALDER
|
| Brandtype |
Brandtype
EH 22352.
|
| Material |
Material
Heat-treated steel
|
| Surface |
Surface
manganese phosphate
|
| Notes on use |
Notes on use
|
All features
All prices are based on the minimum order quantity. If you have any questions or special requirement, please contact Bossard.
Product features
- Press button: aluminium, orange anodised
- Threaded element: stainless steel 1.4542, precipitation-hardened
- Spring: stainless steel
- Shackle: heat-treated steel, manganese phosphated
Features
| Brand |
Brand
HALDER
|
| Brandtype |
Brandtype
EH 22352.
|
| Material |
Material
Heat-treated steel
|
| Surface |
Surface
manganese phosphate
|
| Notes on use |
Notes on use
|
Assembly notice
Threaded lifting pins are designed to lift and hold point loads. Threaded lifting pins are not suited for the rotation of the load or for passenger transportation!
Soilings (e.g. grits and grinds, oil and emulsion deposits, dust …) can affect the functioning of the threaded lifting pins.
When inserting a threaded lifting pin, the rotation of the load must be prevented.
Using damaged threaded lifting pins can be perilous. Before any use carefully inspect the threaded lifting pins (i.e. deformities, breaks, rips, damages, missing threaded elements, corrosion, unlocking function).
Threaded lifting pins must be screwed in completely and bear completely on the bearing surface.
When inserting a threaded lifting pin, the rotation of the load must be prevented.
Damaged threaded lifting pins must be withdrawn from service immediately.
Illustration assembly
Warnings
Products are subject to the relevant security requirements in use as load suspension devices. The mounting instructions and loads must be observed.