HALDER EH 22352.
BN 13400 - Threaded lifting pins self locking, with movable shackle
- Pulsante: alluminio, anodizzato arancione
- Gambo filettato: INOX 1.4542, indurito per precipitazione
- Molla: INOX
- Anello: acciaio da bonifica, fosfatato al manganese
| Brand |
Brand
HALDER
|
| Linea di prodotti |
Linea di prodotti
EH 22352.
|
| Material |
Material
Heat-treated steel
|
| Surface |
Surface
manganese phosphated
|
| Note sull'uso |
Note sull'uso
|
Tutte le caratteristiche
Caratteristiche del prodotto
- Pulsante: alluminio, anodizzato arancione
- Gambo filettato: INOX 1.4542, indurito per precipitazione
- Molla: INOX
- Anello: acciaio da bonifica, fosfatato al manganese
Caratteristiche
| Brand |
Brand
HALDER
|
| Linea di prodotti |
Linea di prodotti
EH 22352.
|
| Material |
Material
Heat-treated steel
|
| Surface |
Surface
manganese phosphated
|
| Note sull'uso |
Note sull'uso
|
Istruzioni per il montaggio
Threaded lifting pins are designed to lift and hold point loads. Threaded lifting pins are not suited for the rotation of the load or for passenger transportation!
Soilings (e.g. grits and grinds, oil and emulsion deposits, dust …) can affect the functioning of the threaded lifting pins.
When inserting a threaded lifting pin, the rotation of the load must be prevented.
Using damaged threaded lifting pins can be perilous. Before any use carefully inspect the threaded lifting pins (i.e. deformities, breaks, rips, damages, missing threaded elements, corrosion, unlocking function).
Threaded lifting pins must be screwed in completely and bear completely on the bearing surface.
When inserting a threaded lifting pin, the rotation of the load must be prevented.
Damaged threaded lifting pins must be withdrawn from service immediately.
Avvertenze
Products are subject to the relevant security requirements in use as load lifting accessories. The installation instructions and maximum load capacities must be observed. Technical tests comply with DIN EN 13155 for the safety of non-fixed load lifting accessories.