KOENIG EXPANDER® EXPRESS 3000

BN 26280 - Hydropneumatic table press force and distance controlled

for the installation of KOENIG EXPANDER® series MB from Ø 3 - 10 mm (.093" - .375" Inch), series CV from Ø 3 - 10 mm, series LP from Ø 3 - 10 mm and series RE from Ø 4 - 10 mm (.156" - .375" Inch)
Height: approx. 1360 mm
Width: approx. 340 mm (max. 530 mm)
Depth: approx. 495 mm
Working area (height): 250 mm (working height between table top and cylinder, without setting tool)
Working area (depth): 200 mm (center-line spacing between cylinder and C frame)
Table (width x depth): 220 x 160 mm
Weight: approx. 140 kg
Compressive force: 30 kN (max force 29.5 kN at 6 bar)
Cylinder ram: 60 mm
Working stroke: 10 mm (within the cylinder ram)
Working speed: 40 mm/sec (max. possible at 6 bar)
Operating voltage: 230 V/110 V, Automatic switchover to corresponding power supply
Operation: VISUAL POINT terminal with QVGA graphic display
Force / distance control: Sensor adjusted with SIT reference sensor
Software: WINSCOPE software for connection to a PC

更多相關資訊

Brand	Brand KOENIG EXPANDER®
Brandtype	Brandtype EXPRESS 3000
Material	Material Multiple Materials

所有功能

產品尺寸

所有顯示價格均為最低訂購數量之報價，如果您需其他需求數量的報價或特殊要求及問題，請與我們聯繫。

Net price per piece

產品資訊

for the installation of KOENIG EXPANDER® series MB from Ø 3 - 10 mm (.093" - .375" Inch), series CV from Ø 3 - 10 mm, series LP from Ø 3 - 10 mm and series RE from Ø 4 - 10 mm (.156" - .375" Inch)
Height: approx. 1360 mm
Width: approx. 340 mm (max. 530 mm)
Depth: approx. 495 mm
Working area (height): 250 mm (working height between table top and cylinder, without setting tool)
Working area (depth): 200 mm (center-line spacing between cylinder and C frame)
Table (width x depth): 220 x 160 mm
Weight: approx. 140 kg
Compressive force: 30 kN (max force 29.5 kN at 6 bar)
Cylinder ram: 60 mm
Working stroke: 10 mm (within the cylinder ram)
Working speed: 40 mm/sec (max. possible at 6 bar)
Operating voltage: 230 V/110 V, Automatic switchover to corresponding power supply
Operation: VISUAL POINT terminal with QVGA graphic display
Force / distance control: Sensor adjusted with SIT reference sensor
Software: WINSCOPE software for connection to a PC

Quick tool change avoids long changeover times. The required working stroke is preprogrammed and can be retrieved by the Expander type to be processed (max. 32 memory locations). In addition, the working stroke is referenced for each individual Expander, which guarantees high process stability and quality. The press is force and distance controlled; an RS232 interface can be used to trace corresponding data on the customer's computer for later processing. The required software is included in the scope of delivery.