TUBTARA® UFX (UT/FESG)
BN 5860 - Blind rivet nuts countersunk head, round shank, closed end
| Headform |
Headform
Countersunk head
|
| Brand |
Brand
TUBTARA®
|
| Brandtype |
Brandtype
UFX (UT/FESG)
|
| Material |
Material
Steel
|
| Surface |
Surface
zinc plated
|
Al produktinformation
Produktbeskrivelse
Produktinformation
| Headform |
Headform
Countersunk head
|
| Brand |
Brand
TUBTARA®
|
| Brandtype |
Brandtype
UFX (UT/FESG)
|
| Material |
Material
Steel
|
| Surface |
Surface
zinc plated
|
Assembly notice
The countersunk head rivet nut requires a perfect 90° countersink.
After the rivet nut is assembled, the flat head should protrude through the clamped part at least 0,1 mm. During tightening the component that's being fastened will press against the head, consequently preventing the rivet nut from rotating.
Kan anvendes med
BN 14309
TUBTARA® MS 3 - Håndnittetang komplet udrustet - Flere forskellige materialer
BN 25054
TUBTARA® K1 - Håndnitteværktøj komplet udrustet - uden nøgle - Flere forskellige materialer
BN 55432
POP® ProSert® XTN20 - Hydro pneumatisk montageværktøj - Flere forskellige materialer
BN 56258
STANLEY® Assembly Technologies NB08PT-18 - Batteridrevet værktøj til blindnittemøtrikker - Flere forskellige materialer
BN 55422
POP® PNT1000L-PC - Hydro-pneumatisk montageværktøj - Flere forskellige materialer