Tolerances for shafts and holes | Bossard Group

Tolerances for shafts and holes

Find and calculate tolerances for holes and shafts.

Based on standard tolerance classes and limit deviations from ISO 286-2:2010

Diameter

Nominal Diameter : mm

Tolerance Shaft

Tolerance Class Shaft :

Upper Limit Deviation es : µm
Lower Limit Deviation ei : µm
Maximum Shaft Diameter : mm
Minimum Shaft Diameter : mm

Tolerance hole

Tolerance Class Hole :
Upper Limit Deviation ES : µm
Lower Limit Deviation EI : µm
Maximum Hole Diameter : mm
Minimum Hole Diameter : mm