Beskrivning
Produktbeskrivning
Crimping force max. 15 kN
Crimping cycle < 1,5 s (based on connection material)
Number of crimps approx. 300 for 10 mm² Cu DIN 46234 / per battery charge
Battery voltage 10,8 V
Battery capacity 2,5 Ah, Li-Ion (27 Wh)
Battery charging time ca. 40 min.
Ambient temperature -10 °C ... + 40 °C
CSA-file n° 252942
Product information, operating manual, approval, more crimping dies for contact parts: www.klauke.com
Mer information
Excellent crimping results with minimum effort
The Klauke micro with intuitive PowerSense function combines the benefits of manual crimping tools with the convenience of battery powered hydraulic crimping tools
Excellent crimping results with minimum effort
Simple and safe: one-button operating concept for controlling all tool functions
Electronic control with locking function monitors full closing of the dies
Simple and safe, automatic retraction after operation completed
Manual retract as required
Motor stall protection
Ergonomic 2C housing in the Klauke ""In-line-Design""
Fastening eye for use with balancer or as fall protection in field applications
Very low weight and high speed for maximum efficiency
Powerful drive technology for fatigue proof operations
LED for work area illumination
Maintenance display via LED
Project-based reporting with Klauke i-press® software package
Säkerhetsinstruktioner
UN-nummer
UN-3481 Lithium-ion batteries contained in equipment or lithium-ion batteries packed with equipment (including lithium-ion polymer batteries)
Transport och lagring
Correct handling, transport and use of battery-powered products requires knowledge of the applicable laws.
Further notes on residual risks can be found on our web page: Notes on use
Special attention must be paid to the safety precautions and warnings given on the packaging or the instructions given in the operating manual / Safety Data Sheet.
Transports generally take place according to ADR 3.3 in accordance with the conditions of Special Regulation 188. The delivery document specifies the handling.
Innehåll
1 Electromechanical crimping tool
1 Crimping die IS5071 for insulated connector 0.5-6 mm²
1 Akku RAML1225 10,8 V / 2,5 Ah, Li-Ion (27 Wh)
1 Charger LGML1 for 10.8 V Li-Ion batteries, 230V
1 Hard plastic carrying case KKEK50ML
1 Manual