Choose your country or region


South Africa

EN

Canada

FR EN

México

ES EN

United States

EN

Australia

EN

China / 中国

ZH EN

India

EN

South Korea / 대한민국

KO EN

Malaysia

EN

Singapore

EN

Taiwan / 台灣

ZH EN

Thailand

TH EN

Vietnam

VI EN

Česká Republika

CS EN

Denmark

DA EN

Deutschland

DE EN

España

ES EN

France

FR EN

Ireland

EN

Österreich

DE EN

Polska

PL EN

Schweiz / Suisse / Svizzera

DE FR IT EN

Sweden

SV EN

Netherlands

NL EN

Norway

EN

Global

EN

請開始輸入以獲得建議。

搜索建議

Suggestions are being loaded.


產品建議

Suggestions are being loaded.


Materials, heat treatment and chemical composition
(Set screws Property classes 14 H to 45 H)

according to ISO 898, part 5: 2012 table 2

Set screws Property classes 14 H to 45 H - mechanical properties

a) Case hardening is not allowed.
b) In case of dispute, the product analysis applies.
c) Free-cutting steel may be used, with maximum lead content 0,35 %, maximum phosphorus content 0,11 % and maximum sulfur content 0,34 %.
d) Steel with a maximum lead content of 0,35 % may be used.
e) For d ≤ M16 only.
f) This alloy steel shall contain at least one of the following elements in the minimum quantity given: chromium 0,30 %, nickel 0,30 %, molybdenum 0,20 %,
vanadium 0,10 %. Where elements are specified in combinations of two, three or four and have lower alloy contents than those given above in this footnote,
the limit value to be applied for steel class determination is 70 % of the sum of the individual limit values shown above in this footnote for the two, three or
four elements concerned.