Viti autoformanti a testa bombata con filettatura metrica, cava esalobata ed intaglio non passante
BN 84402
DIN 7500
| Headform |
Headform
Pan Head
|
| Drive |
Drive
Hexalobular with slot
|
| Thread |
Thread
fully threaded
|
| Material |
Material
Steel
|
| Material execution |
Material execution
case-hardened
|
| Surface |
Surface
zinc plated blue, added lubricant
|
| Hardness |
Hardness
450-560 HV
|
Alle Eigenschaften
1) Tapered thread end max. 4P
2) Trilobular cross-section
Norm
DIN 7500
Zusätzliche Informationen
Application: steel, aluminum, aluminum die-casting, zinc die-casting, non ferrous materials.
A technical brochure is available on request.
A technical brochure is available on request.
Eigenschaften
| Headform |
Headform
Pan Head
|
| Drive |
Drive
Hexalobular with slot
|
| Thread |
Thread
fully threaded
|
| Material |
Material
Steel
|
| Material execution |
Material execution
case-hardened
|
| Surface |
Surface
zinc plated blue, added lubricant
|
| Hardness |
Hardness
450-560 HV
|
Warnings
ISO 4042
Quenched and tempered fasteners ≥ 360 HV and tempered case-hardened fasteners with electroplated coatings: Susceptible to hydrogen embrittlement!
Further notice to residual risks can be found on our web page: Notes on use
BN 13916 - ~DIN 7500 C
Gewindefurchende Linsenschrauben ~Form C, mit metrischem Gewinde und Innensechsrund - Stahl - einsatzgehärtet - verzinkt-blau mit Gleitschicht
BN 14551 - DIN 7500
Gewindefurchende Linsenschrauben mit Kratznocken metrischem Gewinde, Innensechsrund und Schlitz - Stahl - einsatzgehärtet - verzinkt-blau mit Gleitschicht