TUBTARA® UFO (UT/FES)
BN 4577 - Blind rivet nuts countersunk head, round shank, open end
| Kopfform |
Kopfform
Countersunk head
|
| Marke |
Marke
TUBTARA®
|
| Produktlinie |
Produktlinie
UFO (UT/FES)
|
| Werkstoff |
Werkstoff
Steel
|
| Oberfläche |
Oberfläche
zinc plated
|
All features
Product features
Features
| Kopfform |
Kopfform
Countersunk head
|
| Marke |
Marke
TUBTARA®
|
| Produktlinie |
Produktlinie
UFO (UT/FES)
|
| Werkstoff |
Werkstoff
Steel
|
| Oberfläche |
Oberfläche
zinc plated
|
Montagehinweise
The countersunk head rivet nut requires a perfect 90° countersink.
After the rivet nut is assembled, the flat head should protrude through the clamped part at least 0,1 mm. During tightening the component that's being fastened will press against the head, consequently preventing the rivet nut from rotating.
Suitable for this
BN 14309
TUBTARA® MS 3 - Handsetzzange komplett ausgerüstet - Mehrere Materialien
BN 25054
TUBTARA® K1 - Hand rivet tool fully equipped without socket wrench - Multiple Materials
BN 55432
POP® ProSert® XTN20 - Hydropneumatic setting tool - Multiple Materials
BN 56258
STANLEY® Assembly Technologies NB08PT-18 - Battery-Powered Rivet Tool in T STAK™-kitbox, base tool without battery / charger - Multiple Materials
BN 56262
Qonnect® Q-TOOL N12XL - Battery setting tool for blind rivet nuts- and blind rivet screws - Multiple Materials
BN 55422
POP® PNT1000L-PC - Hydroppneumatic setting tool - Multiple Materials