Viti a testa esagonale parzialmente filettate
BN 21201
DIN 931
(Standard withdrawn)
ISO 4014
~UNI 5737
~ČSN 021101
| Headform |
Headform
Hexagon
|
| Drive |
Drive
Hexagon
|
| Thread |
Thread
partially threaded
|
| Material |
Material
Steel
|
| Property class |
Property class
8.8
|
| Surface |
Surface
Zinc flake coated ISO 10683/flZnL/nc/480h/C (µ=0.12-0.18)
|
Všechny funkce
M10; M12: wrench size according to ISO on request
Norma
Funkce
| Headform |
Headform
Hexagon
|
| Drive |
Drive
Hexagon
|
| Thread |
Thread
partially threaded
|
| Material |
Material
Steel
|
| Property class |
Property class
8.8
|
| Surface |
Surface
Zinc flake coated ISO 10683/flZnL/nc/480h/C (µ=0.12-0.18)
|
Assembly notice
The designation system according to ISO 10683 defines the expected corrosion protection and the friction coefficient range. Further performance specifications of a coating brand used are not specified. Additional thread coating may limit the ability to install zinc flake coated screws < M5 by hand.
BN 20236 - DIN 931 - ISO 4014
Šrouby se šestihrannou hlavou s částečným závitem - Ocel - 8.8 - pozinkováno, silnostěnná pasivace
BN 20543 - DIN 931 - ISO 4014
Šrouby se šestihrannou hlavou s částečným závitem - Ocel - 8.8 - pozinkováno modře CresaCoat® C 313 Silver
BN 20544 - DIN 931 - ISO 4014
Šrouby se šestihrannou hlavou s částečným závitem - Ocel - 8.8 - pozinkováno modře CresaCoat® C 307 Black
BN 21200 - DIN 933 - ISO 4017
Šrouby se šestihrannou hlavou s plným závitem - Ocel - 8.8 - zinkové lamely ISO 10683/flZnL/nc/480h/C (µ=0.12-0.18)