Klauke® EK 60/22 CFB
BN 27736 - Battery powered hydraulic crimping tool with Bosch battery system crimping range 6-300 mm²
Presskraft 60 kN
Hub / Öffnungsweite 17 mm
Presszeit 3 s bis 5 s (abhängig vom Pressquerschnitt)
Akkuspannung 18 V
Akkukapazität 5,0 Ah Li-Ion (90 Wh)
Akkuladezeit 45 min
Umgebungstemperatur -10 °C ... +40 °C
UL-file n° E244184
Produktinformationen, Betriebsanleitung/Sicherheitsdatenblatt, Zulassungen: www.klauke.com
| Marke |
Marke
Klauke®
|
| Produktlinie |
Produktlinie
EK 60/22 CFB
|
| Werkstoff |
Werkstoff
Multiple Materials
|
| UN-Nummer |
UN-Nummer
|
| Anwendungshinweise |
Anwendungshinweise
Anwendungshinweise
|
Toutes les caractéristiques
Net price per piece
Caractéristiques de produit
Presskraft 60 kN
Hub / Öffnungsweite 17 mm
Presszeit 3 s bis 5 s (abhängig vom Pressquerschnitt)
Akkuspannung 18 V
Akkukapazität 5,0 Ah Li-Ion (90 Wh)
Akkuladezeit 45 min
Umgebungstemperatur -10 °C ... +40 °C
UL-file n° E244184
Produktinformationen, Betriebsanleitung/Sicherheitsdatenblatt, Zulassungen: www.klauke.com
Informations complémentaires
Grosser Pressbereich bis 300 mm²
Schnelle Presszyklen durch automatischen Rücklaufstopp (ARS)
Alle Werkzeugdaten im Blick dank Display und i-press® App
Akku-Sytem Bosch
Einfaches Auslesen aller Daten mittels Bluetooth
Geschlossener Kopf, aufklappbar, drehbar
Qualitätssicherung mittels optischen und akustischen Signalen im Fehlerfall
Ermüdungsfreies Arbeiten durch ausgewogene Schwerpunktlage
LED zur Arbeitsraumbeleuchtung
Einfach und sicher: Automatischer Rücklauf nach vollendetem Arbeitsgang
Automatischer Rücklaufstopp (ARS) zur Positionssteuerung bei Mehrfachpressungen
Immer einsatzbereit dank Ladestand- und Serviceanzeige
Caractéristiques
| Marke |
Marke
Klauke®
|
| Produktlinie |
Produktlinie
EK 60/22 CFB
|
| Werkstoff |
Werkstoff
Multiple Materials
|
| UN-Nummer |
UN-Nummer
|
| Anwendungshinweise |
Anwendungshinweise
Anwendungshinweise
|
Lieferumfang
1 Battery-powered hydraulic crimping tool
1 Bosch battery RALB2EU 18 V / 5.0 Ah, Li-Ion (90 Wh)
1 Bosch quick-charger LGLB1EU for 18 V Li-Ion batteries
1 Hard plastic carrying case KK120NG
1 Manual
Warnhinweis
Correct handling, transport and use of battery-powered products requires knowledge of the applicable laws.
Further notes on residual risks can be found on our web page: Notes on use
Special attention must be paid to the safety precautions and warnings given on the packaging or the instructions given in the operating manual / Safety Data Sheet.
Transports generally take place according to ADR 3.3 in accordance with the conditions of Special Regulation 188. The delivery document specifies the handling.
UN-Nummer
UN-3481 Lithium-ion batteries contained in equipment or lithium-ion batteries packed with equipment (including lithium-ion polymer batteries)
Adapté pour
BN 27702 - DIN 46235
Cosses à sertir DIN - Compression cable lugs DIN - Copper - tin-plated
BN 27703 - DIN 46235
Cosses à sertir DIN coudées à 90° - Compression cable lugs angle type 90° - Copper - tin-plated
BN 27705
Cosses tubulaires version normale, avec trou d'inspection - Tubular cable lugs standard type, with inspection hole - Copper - tin-plated
BN 27713
Manchons à sertir en série version normale - Butt connectors standard type - Copper - tin-plated
BN 27714
Cosses tubulaires pour conducteurs ronds fins et conducteurs ronds finement torsadés - Tubular cable lugs for fine and superfine stranded round conductors - Copper - tin-plated
BN 27721 - DIN 46329
Klauke® - Cosses à sertir - Aluminium - étamé
BN 27753
Klauke® F 22 - Inserts de sertissage étroites pour cosses tubulaires pour conducteurs ronds fins et conducteurs ronds finement torsadés - Laiton
BN 27754
Klauke® D 22 - Inserts de sertissage étroites pour cosses à sertir selon DIN 46235 - Laiton
BN 27751
Klauke® D 22 Set - Set d'Inserts de sertissage dans un coffret plastique étroites pour cosses à sertir selon DIN 46235 - Laiton
BN 27752
Klauke® R 22 Set - Set d'Inserts de sertissage dans un coffret plastique étroites pour cosses tubulaires - Laiton
BN 27712 - DIN 46267-1
Manchons à sertir non soumis à la traction avec séparation - Non-Tension compression joints with oil stop - Copper - tin-plated
BN 22577 - DIN 48201
Metal Product® - Manchons de réduction à sertir non soumis à la traction avec séparation - Cuivre - étamé
BN 27789
Replacement Bosch battery for crimping tools - Replacement Bosch battery for crimping tools - Multiple Materials
BN 27791
Replacement Bosch battery for crimping tools - Replacement Bosch battery for crimping tools - Multiple Materials
BN 27766
Charger for battery Bosch with 18 V - Charger for battery Bosch - Multiple Materials