FRIEDBERG
BN 14002 - Heavy hex nuts HV for heavy hex head bolts HV
EN 14399-4
- Ecrou lubrifié classe-k: K1
Informations sur les produits: www.august-friedberg.com
Autres documentations: www.Bossard.com
| Marque |
Marque
FRIEDBERG
|
| Material |
Material
Steel
|
| Property class |
Property class
10
|
| Surface |
Surface
hot dip galvanized
|
| Indications d'utilisation |
Indications d'utilisation
|
Toutes les caractéristiques
Standard
Caractéristiques de produit
- Ecrou lubrifié classe-k: K1
Informations sur les produits: www.august-friedberg.com
Autres documentations: www.Bossard.com
Caractéristiques
| Marque |
Marque
FRIEDBERG
|
| Material |
Material
Steel
|
| Property class |
Property class
10
|
| Surface |
Surface
hot dip galvanized
|
| Indications d'utilisation |
Indications d'utilisation
|
Illustration functional principle
Assembly notice
The HV nuts are lubricated for installation. Correct installation is achieved by screwing on the HV nut EN 14399-4 with the corresponding HV bolt EN 14399-4 and HV washers EN 14399-6. Pairing of the same make ensures the correct matching and the intended tightening behaviour. Additional lubrication of bolts, nuts and washers changes the preload parameters and causes assembly errors.
Warnings
Nuts are to be used with bolts EN 14399-4 and washers EN 14399-6.
Heavy hex bolting assemblies are designed for highstrength structural joints and are subject to specific regulations. Individual replacements of parts is not recommended.
BN 14000 - EN 14399-1
FRIEDBERG - Garnitures HV avec vis à tête hexagonale, écrou et rondelles - Acier - 10.9 - zingué à chaud
BN 14001 - EN 14399-4
FRIEDBERG - Vis à tête hexagonale HV - Acier - 10.9 - zingué à chaud
BN 14003 - EN 14399-6
FRIEDBERG - Rondelles plates chanfreinées HV pour vis à tête hexagonale et écrous HV - Acier - zingué à chaud