FASTEKS® - Speed Rivets

FASTEKS^® speed rivets are preloaded on the riveting mandrel. This makes FASTEKS^® speed rivets unique because only the mandrel needs to be managed. The single-use mandrel guarantees the safety of the process because the operator does not need to determine appropriate mandrel or check for mandrel wear.

Features:

Rapid processing (up to 70 rivets installed per minute)
Cost saving, no breakstem no waste
Lighweight
Variety of materials

Standard Speed Rivets
Features

Thanks to the formation of the closing head, FASTEKS^® standard speed rivets achieve a high clamping strength.

Head style: Dome head, Countersunk head
Material: Aluminum, Steel, Stainless steel
Size range: Ø3.2-4.8 mm (1/8-3/16”)

Multi Speed Rivet
Features

With a high grip range, FASTEKS^® Multi speed rivet offers good bearing stress.

Head Style: Dome head, Countersunk head
Material: Aluminum, Steel, Stainless Steel
Size range: Ø1.9-4.8 mm (5/64-3/16”) (dome head); Ø3.0-4.8 mm (.12-3/16”) (countersunk head)

Grooved Speed Rivet
Features

With the solderable / solder-resistant surface coat, FASTEKS^® grooved speed rivet is particularly suitable for applications in electronic components.

Head style: Dome head
Material: Aluminum, Brass
Size range: Ø1.7-2.6 mm (.067-.10”)

Screw Speed Rivet
Features

With boring thread, FASTEKS^® Screw Speed Rivet can be unscrewed after installation (counter-sunk head is transformed into flat head in the riveting process)

Head style: Dome head
Material: Steel
Size range: Ø2.7-3.5 mm (.11-.14”)

Space Speed Rivet
Features

FASTEKS^® space speed rivets can be used as a spacer on printed circuit boards (board thickness 0.8-2.4 mm (.03-.09”))

Material: brass
Size range: Ø2.5-3.2 mm (.1-1/8”)

Liên hệ với chúng tôi

Quay lại