SPAX®
BN 1581 - Pozi Flat countersunk head chipboard screws form Z, partially threaded with 4CUT point
Other documentation: www.spax.com
| Headform | 
                               
            Headform
            Countersunk head 90°
 
     | 
                    
| Drive | 
                               
            Drive
            Cross recess Z (Pozidriv)
 
     | 
                    
| Thread | 
                               
            Thread
            partially threaded
 
     | 
                    
| Brand | 
                               
            Brand
            SPAX®
 
     | 
                    
| Material | 
                               
            Material
            Steel
 
     | 
                    
| Material execution | 
                               
            Material execution
            case-hardened
 
     | 
                    
| Surface | 
                               
            Surface
            WIROX®, added lubricant
 
     | 
                    
| Version | 
                               
            Version
            with 4CUT point
 
     | 
                    
| Notes on use | 
                               
            Notes on use
            
                     
     | 
                    
Alla funktioner
4CUT cutter for screw lengths of 160 mm and over (Significantly reduces the screwing torque).
Produktbeskrivning
Other documentation: www.spax.com
Mer information
The WIROX® coating is an alternative chromium free (VI) surface coating with considerably higher corrosion protection compared to yellow electrogalvanizing.
Funktioner
| Headform | 
                               
            Headform
            Countersunk head 90°
 
     | 
                    
| Drive | 
                               
            Drive
            Cross recess Z (Pozidriv)
 
     | 
                    
| Thread | 
                               
            Thread
            partially threaded
 
     | 
                    
| Brand | 
                               
            Brand
            SPAX®
 
     | 
                    
| Material | 
                               
            Material
            Steel
 
     | 
                    
| Material execution | 
                               
            Material execution
            case-hardened
 
     | 
                    
| Surface | 
                               
            Surface
            WIROX®, added lubricant
 
     | 
                    
| Version | 
                               
            Version
            with 4CUT point
 
     | 
                    
| Notes on use | 
                               
            Notes on use
            
                     
     | 
                    
Warnings
ISO 4042
Quenched and tempered fasteners ≥ 360 HV and tempered case-hardened fasteners with electroplated coatings: Susceptible to hydrogen embrittlement!
Further notice to residual risks can be found on our web page: Notes on use
BN 20184
SPAX® - Hexalobular (6 Lobe) socket flat countersunk head chipboard screws T-STAR plus, partially threaded with 4CUT point - Steel - case-hardened - WIROX®, added lubricant
BN 20594
Universal hexalobular (6 Lobe) socket flat countersunk head wood screws partially threaded, cutting ribs under the head, friction thread, end mill cutter - Steel - case-hardened - zinc plated blue, added lubricant
BN 20699
Hexalobular (6 Lobe) socket flat countersunk head partial thread and cutting ribs under the head - Steel - case-hardened - zinc plated blue, added lubricant
BN 3548
SPAX® - Pozi Flat countersunk head chipboard screws form Z, partially threaded with 4CUT point - Steel - case-hardened - YELLOX®, added lubricant