BancLok® MV 812-815
BN 1046 - Press-in threaded inserts with expansion anchoring without head, with gear rim and anchoring profile, for thermoplastics
| Headform |
Headform
Straight knurled
|
| Brand |
Brand
BancLok®
|
| Brandtype |
Brandtype
MV 812-815
|
| Material |
Material
Brass
|
| Surface |
Surface
plain
|
Alla funktioner
Mer information
Core hole d4 in injection molded parts: Taper = 0,5-1°, Nominal diameter = Middle hole
Funktioner
| Headform |
Headform
Straight knurled
|
| Brand |
Brand
BancLok®
|
| Brandtype |
Brandtype
MV 812-815
|
| Material |
Material
Brass
|
| Surface |
Surface
plain
|
Assembly notice
1. Place shoulder of insert into pre-drilled hole.
2. Press in the insert by using a setting punch with pilot.
3. Fasten the workpiece with screw:
- The cup point or the ribbing anchored firmly while screwing in the wall of the hole.
- The residual strength acts as a screw locking.