TUBTARA® UFO KN / SFO KN
BN 25094 - Blind rivet nuts countersunk head with knurl, shank with improved knurl, open end
- With increased twisting resistance in soft materials such as: aluminum, plastic etc.
| Headform |
Headform
Countersunk head
|
| Brand |
Brand
TUBTARA®
|
| Brandtype |
Brandtype
UFO KN / SFO KN
|
| Material |
Material
Stainless steel
|
| Material type |
Material type
A2
|
Alla funktioner
Produktbeskrivning
- With increased twisting resistance in soft materials such as: aluminum, plastic etc.
Funktioner
| Headform |
Headform
Countersunk head
|
| Brand |
Brand
TUBTARA®
|
| Brandtype |
Brandtype
UFO KN / SFO KN
|
| Material |
Material
Stainless steel
|
| Material type |
Material type
A2
|
Assembly notice
The countersunk head rivet nut requires a perfect 90° countersink.
After the rivet nut is assembled, the flat head should protrude through the clamped part at least 0,1 mm. During tightening the component that's being fastened will press against the head, consequently preventing the rivet nut from rotating.
Lämplig för detta
BN 14309
TUBTARA® MS 3 - Hand rivet setter fully equipped - Mutiple Materials
BN 25054
TUBTARA® K1 - Hand rivet tool fully equipped without socket wrench - Mutiple Materials
BN 55432
POP® ProSert® XTN20 - Hydropneumatic setting tool - Mutiple Materials
BN 6429
AVDEL® 742 - Hydropneumatic setting tool without accessories - Mutiple Materials
BN 56258
STANLEY® Assembly Technologies NB08PT-18 - Battery Powered Blind Rivet Nut Tool - Mutiple Materials
BN 55422
POP® PNT1000L-PC - Hydroppneumatic setting tool - Mutiple Materials